Technical specifications:
Engine model: WD10G175E25
Dimensions: 5530 × 4222 × 3190
Operating mass without ripper: 19,000 kg
Engine type: Vertical, inline, liquid-cooled four-stroke
Cylinder configuration: 6-cylinder, bore × stroke: 126 × 130 mm
Rated power: 165 HP
Rated speed: 1,850 r/min
Maximum torque: 830 N·m
Motor: 24V
Fuel consumption ratio: ≤215 g/kW·h
Generator: 24V 55A
Starting method: Engine start
Cooling method: Water cooling
Battery: 24V (12V × 2) - 120A·h × 2
Torque converter model: Single-stage, one-way, three-component
Main parameters:
Gearbox type: Planetary shift with 3 forward/3 reverse gears, rapid shifting and directional change
Central drive shaft: Drives a helical gear and a pair of helical bevel gears
Forward speed: 0-3.59/0-6.7/0-12.37
Width: 1000 mm
Reverse speed: 0-4.33/0-8.90/0-14.96
Width: 60 mm
Onboard clutch: Wet multi-disc friction, compression spring, hydraulic chamber
Side brake: Wet floating mechanical control with pedal and bidirectional belt
Final drive: Reduces secondary speed of drive wheel, with bubble lubrication
Frame suspension: Semi-rigid balanced frame with three joints
Number of carrier rollers (per side): 8
Number of guide rollers (per side): 1
Track pitch: 203 mm
Track model: Foldable single-track tooth
Length without ripper: 5,530 mm
Number of bottom hooks (per side): 42
Blade height: 1,035 mm
Track center distance: 2,330 mm
Track grounding length: 2,920 mm
Ground pressure: 39.2 kPa
Minimum ground clearance: 382.5 mm
Weight without equipment: 19,000 kg
Hydraulic system rated pressure: 12 MPa
Hydraulic pump type: Double-joint gear pump
Hydraulic system volume: 80 L
Control valve type: Spool type
Straight blade (replaceable with U-blade):
Blade width: 4,222 mm
Maximum blade lift height: 957 mm
Dump volume: 4.5 m³
Maximum blade lowering depth: 400 mm
Maximum blade tilt angle: 487 mm
Ripper type: Triple-shank ripper
Maximum lift height (ripper): 550 mm
Soil ripper control type: Hydraulic control
Maximum lift height (non-ripper): 510 mm
Ripper weight: 1,600 kg
Width without ripper: 4,222 mm
Height without ripper: 3,190 mm (3,260 mm)